TouchQube Roof Unit (Solar Wireless Tank Sensor)
ConnectivityLong-range RF + indoor Wi-Fi
ControlApp, offline mode, and touch buttons
ProtectionOverflow prevention and dry run safety

TouchQube Roof Unit (Solar Wireless Tank Sensor)

The TouchQube Roof Unit sits on top of your water tank and measures the water level with an ultrasonic sensor. It sends the reading by radio straight to your TouchQube Control Unit, so no wire is needed from the roof to your home. It runs on its own solar panel and rechargeable lithium-ion battery. Once fully charged it lasts about 10 days without sun, and a USB-C port lets you top it up during long rainy or winter spells. It also measures the air temperature inside the tank to keep its readings accurate. Installation is DIY. Drill a 37 mm hole in the tank lid, place the unit, and tighten the cone screw-bolt from the top. You never need to go inside the tank, and no manual calibration is needed after pairing. The Roof Unit works with a TouchQube Control Unit and does not work on its own. Use it as a replacement, or to add a tank to your TouchQube system. Pair it with your Control Unit in the TouchQube app using its Sensor Pair ID.

In stock 18.00% tax extra
₹3399.00
₹4699.00
Save 28%
Select quantity

Update cart instantly and continue to checkout in one tap.

Secure checkout Works online and offline Built for daily water control

How it works

Set it once. It runs itself.

MOTOR ON MOTOR OFF Tank fullMotor OFF
  1. 1Measures
  2. 2Sends
  3. 3Controls the motor
  4. 4Alerts your phone
Truly wirelessSolar poweredFully automatic

Product overview

Why homeowners choose TouchQube Roof Unit (Solar Wireless Tank Sensor)

Better visibility. Better control. Less water waste.

The TouchQube Roof Unit sits on top of your water tank and measures the water level with an ultrasonic sensor. It sends the reading by radio straight to your TouchQube Control Unit, so no wire is needed from the roof to your home. It runs on its own solar panel and rechargeable lithium-ion battery. Once fully charged it lasts about 10 days without sun, and a USB-C port lets you top it up during long rainy or winter spells. It also measures the air temperature inside the tank to keep its readings accurate. Installation is DIY. Drill a 37 mm hole in the tank lid, place the unit, and tighten the cone screw-bolt from the top. You never need to go inside the tank, and no manual calibration is needed after pairing. The Roof Unit works with a TouchQube Control Unit and does not work on its own. Use it as a replacement, or to add a tank to your TouchQube system. Pair it with your Control Unit in the TouchQube app using its Sensor Pair ID.

Key features

Everything it does, at a glance

13 highlights · hover or tap a card for details
  • Truly wireless

    Ultrasonic water level sensing, about 35-350 cm range

    1
  • Supports tanks up

    Supports tanks up to about 10,000 litres

    2
  • Solar panel with

    Solar panel with rechargeable lithium-ion battery

    3
  • About 10 days

    About 10 days of running without sun on a full charge

    4
  • USB-C port for

    USB-C port for backup charging

    5
  • Truly wireless

    Wireless RF link: about 500-600 m reliable, up to about 1 km

    6
  • Tested through concrete

    Tested through concrete slabs, up to about 12 floors

    7
  • Sends a new

    Sends a new reading about every 20 seconds

    8
  • Measures air temperature

    Measures air temperature inside the tank

    9
  • Built for rain,

    Built for rain, splashing, tank moisture and heat

    10
  • DIY install

    DIY install in a 37 mm hole with the cone screw-bolt

    11
  • Works offline

    Works with the TouchQube Control Unit

    12
  • Warranty: 1 year,

    Warranty: 1 year, battery 6 months

    13

Specifications

Quick specs

Category
Smart Water Level Controller

Buying guides

Related guides and FAQs

View all guides

You may also like